Back to previous page

DF12-DOCK40 docking board 

Features:

• Supports DF12-DIP and DF12-SIP modules

• Installed with Motorola serial monitor

• On-board TTL-RS232 converter

• Auto-start user application program from on-chip flash memory via a slide switch
• Two LEDs connected to port T
• Two push button switches connected to port A
• On-board speaker for music applications
• Installed with a 30-pin right angle male header and each pin is labeled with its signal name

• Pluggable into a solderless breadboard

• 20x2 male header provides all I/O ports to user target board using a ribbon cable

• 30x1 female header for quick prototyping using a solderless breadboard

• Large Turret terminal for ground test point on each module

• Green LED power indicator

• RUN/LOAD slide switch

• Reset button

• RS-232 Serial Port w/ DB9 Connector

• CAN 2.0 interface headers

• Package also includes useful software:
• Fully debugged sample programs including source code
• Test program that simultaneously plays a song, flashes PT0-PT1 LEDs, changes LED brightness by adjusting the trimmer pot
• Eric Engler's Windows AsmIDE software with the Motorola free assembler
• Small PCB size of 3.3" X 2.5"

The available option will be an RS232 cable and an AC adapter.  

When it's plugged into a breadboard it stands on the breadboard vertically and will create some degree of instability, but the DB9 RS232 connector is connected to the side, not to the top of the docking board, so the cable will not flip the breadboard over when it's moved.

The DOCK40 board with the DIP module installed